Description

Solid carbide milling cutters Design: DIN 6527 with centre cut, suitable for drilling. Application: Can be used for universal machining. Feed is approx. 50% higher than with a 2-edged cutter. The 45° spiral results in a soft and peeling cut and thus a high surface quality. Burr formation on the cutting edges is avoided. Design: Solid carbide (K10/K20), DIN 6527, with centre cut. Cutting speed approx. 50% higher than with non-coated tools. Dry machining possible. Application: Can be used for universal machining. Feed is approx. 50% higher than with a 2-edged cutter. The 45° spiral results in a soft and peeling cut and thus a high surface quality. Burr formation on the cutting edges is avoided.

Specifications

Durchmesser	4,00 mm
Ø d1 = k10	4,00 mm
Stähle bis 850 N/mm²	72
Stähle bis 1000 N/mm²	72
Stähle bis 1400 N/mm²	44
Al, Al- und Mg-Leg.	145
Kupfer, Messing, Bronzen	106
Typ	Typ N
Schaft-Ø d2 = h6	4 mm
Schneidenlänge l2	57 mm
Schneidstoff	VHM
Zähnezahl	6 mm
DIN	DIN 6527-L
Schaft	8 mm
fz	0,007 mm